Product

2.5mm Phone Jack
2.5mm SMD Stereo Jack
2.5mm SMD Stereo Jack
Specification
Electrical Requirements

  1. Rating :
    1A/12V DC Max.
    2/3

  2. Dielectric Strength : The socket shall withstand without failure, a potential of 500 volts r.m.s. 50/60 Hz applied between mutually insulated metal parts for one minute.

  3. Insulation Resistance : Insulation resistance between insulated metal parts shall be 100 Megohm or more at initial and 50 Megohm or more after cold test, hot test, and humidity test when measured with a 500 volts D. C. insulation resistance meter.

  4. Contact Resistance : Contact resistance shall be less than 50 Milliohms at initial and 100 Milliohms after life test between a terminal of the socket and that of the mating plug; less than 30 Milliohms at initial and 60 Milliohms after life test between terminal of the socket in a closed circuited, when measured at a current of less than 100 Milliampere 1 KHz. The Mating plug use shall be cleaned and free from oxidation file of the surface.


Mechanical Requirement

  1. Insertion and Withdrawal Force : The insertion and withdrawal force shall be 0.3 – 3Kgs at initial and 0.2 – 2Kgs after life test with the gauge plug.

  2. Terminal Strength : The terminal shall be capable of withstanding a force of 500 Gram applied in any directions for 10 second without loosing and breakdown.


Features
The Mating plug shall be in 2.5mm diameter.
Material
Plastic Housing : PA6T
Terminal 1 : Copper Alloy, Gold Flash
Terminal 2 : Copper Alloy, Gold Flash
Terminal 3 : Copper Alloy, Gold Flash
Terminal 4 : Copper Alloy, Gold Flash
Terminal 10 : Copper Alloy, Gold Flash
Terminal 11 : Copper Alloy, Gold Flash
Loading...
Contact Us